Products Class
Products Your location:Home - Products -Q647Y-160P 0.7 Second Switch Pneumatic Hard Seal Cut-off Ball Valve

Q647Y-160P 0.7 Second Switch Pneumatic Hard Seal Cut-off Ball Valve

The company has designed a 0.7 second hard sealed high-temperature and high-pressure cut-off ball valve to cooperate with the research and development of nuclear testing at Shanghai Jiao Tong University,the valve has successfully passed the test.The success of the valve test symbolizes that the [Zhonghang brand] valve has risen a step by using the valve under harsh working conditions in domestic.
The opening and closing time of the valve after ventilation is only 0.7 seconds.

Technical features:
A quick shut-off valve developed in conjunction with Shanghai Jiao Tong University Nuclear Test. The valve is installed at the middle pipeline of the nuclear reactor,during the test operation, the temperature and pressure of the nuclear reactor rise linearly,when using nuclear energy, the pipeline needs to be opened and quickly closed for no more than 1 second before normal testing can be carried out.
Product advantages:

  1. The valve seat adopts a spring structure, which pushes the valve seat towards the sphere, ensuring good low-pressure sealing performance.
  2. Both the front and back valve seats of the fixed ball valve can be sealed, which is known as the bidirectional sealing feature,by using the built-in discharge valve, the middle chamber of the valve body can be discharged outward.
  3. The pivot adopts an anti blow out protection structure and low friction coefficient bearings. Has excellent performance, high reliability, and a wide range of applications.

Execution standards:
Design and manufacturing: API 6D/API 608
Structural length: ASME B16.10
Flange standard: ASME B16.5/B16.47
Pressure test inspection: API598/API6D/API600
Pressure and temperature: ASME B16.34

 

Performance parameters:

Q647Y-160P 0.7 second switch pneumatic hard seal cut-off ball valve connection size

Pressure rating£¨MPa£©

6.4

10

16

24

Valve strength test pressure£¨MPa£©

9.6

15

24

36

Valve sealing test pressure£¨MPa£©

7.04

11

17.6

26.4

Applicable temperature ¡æ

©196¡æ¡«550¡æ

Main material

High quality carbon/stainless steel

Connection form

Flange/Welding

Opening and closing form

Pneumatic rack/pneumatic fork

Applicable medium

Water, gas, oil etc

Connection standard

ASME B16.5/B16.47

 

External structure connection dimensions:

Q647Y-160P 0.7 second switch pneumatic hard seal cut-off ball valve external connection dimensions

Inch

2¡å

21/2¡å

3¡å

4¡å

5¡å

6¡å

8¡å

10¡å

12¡å

14¡å

16¡å

18

20¡å

24¡å

d1

51

64

76

102

127

152

203

254

305

337

387

438

489

591

L

RF

178

191

203

229

356

394

457

533

610

686

762

864

914

1067

BW

216

241

283

305

381

457

521

559

635

762

838

914

991

1143

H

102

114

127

152

184

219

273

360

395

430

470

550

580

700

Manual

H1

107

125

152

178

300

330

398

495

580

625

670

698

840

1050

E

-

-

-

-

-

-

116

116

171

171

257

257

257

150

F

-

-

-

-

-

-

350

350

420

420

400

400

400

410

W

230

400

400

650

1050

150

600

600

800

800

800

800

800

800

Wt£¨kg£©

12

16

22

35

58

74

205

322

576

576

864

1280

1600

3540

Precautions for installation and use of ball valves:

  1. Be careful during installation and construction, and avoid hitting the valve.
  2. Before installation, the ball valve should be inspected to verify its specifications and model, and to identify any damage, especially for the valve stem. Rotate it a few more times to see if it is skewed, as the valve stem is most likely to be knocked off during transportation. Also, remove any debris inside the valve.
  3. When lifting a ball valve, the rope should not be tied to the hand wheel or valve stem to avoid damaging these components,it should be tied to the valve body.
  4. The pipeline connected to the ball valve must be cleaned thoroughly. Compressed air can be used to blow away iron oxide shavings, mud and sand, welding slag, and other debris. These debris not only easily scratch the sealing surface of the ball valve, but also block the small valve with large particles (such as welding slag), causing it to fail.
  5. Leave a position for the valve handle to rotate during installation.
  6. Ball valves cannot be used for throttling purposes.
  7. Ball valves with transmission mechanisms should be installed upright.
Add:No.118,Wanyong Road,Langxia Town,Jinshan District,Shanghai,China
Tel: +86 (021) 57392292 57392293
E-mail:rayhan@zhvalve.com
Web:www.zhvalve.com
Copyright © 2023 Shanghai Zhonghang Valve Co., Ltd. All Rights Reserved.